Brochures - People Counters
Video Demonstration
Contact for pricing
The count data is transmitted every 10 seconds to the SNG Hub (Ethernet or 3G) that can be located anywhere within a 30 metre range (Repeater available to extend the range by another 30 metres). The SNG Hub stores the count data and forwards it as data packets at regular intervals to the 'IMMOTION™' reporting application hosted on-site or in the cloud.
The SNG Hub has the ability to collect the count data for up to 10 door counters.
Our 'IMMOTION™' software allows users to analyze the data by hour, day, week, month, and year in table or graph form. This valuable information reveals peak traffic periods to determine optimal operating hours and staffing requirements, and helps calculate customer/sales conversion ratios.
The 'IMMOTION™' software/database is optimized to handle multiple locations and/or people counters for easy viewing and overall analysis. The 'IMMOTION™' software/database is scalable so that additional SNG Hub's and/or door counters can be added at any time.
The wireless counters consist of 2 doorway sensors (transmitter and receiver) that generate an infrared beam across an entrance up to 6 meters wide. Each time a person walks through the entrance and breaks the infrared beam, the count increases by one. The wireless counters are bi-directional and will count both 'In' and 'Out' directions and provide totals for each direction.
The doorway sensors come with mounting plates that allow them to be fixed to a flat surface, using either screws or double sided mounting tape. The counters use standard AA batteries that will last up to 2 years with standard usage. Additional brackets can be purchased for more complex mounting configurations.
The SNG Hub wirelessly communicates with the people counting sensors to receive the latest, up to date, count data from one or more entrances within a 30 metre radius. Once received, the count data is automatically sent at regular intervals to the IMMOTION™ software where the count data can be viewed/exported by hour/day/week/month year totals.
The SNG Hub is available in two editions:
The Ethernet edition (SNG10E) is designed to connect directly into your local network via an Ethernet cable. The SNG10E is ideal for situations where there are Ethernet ports available within a 30 metre range of the entrance where the doorway sensors are installed. This device is able to collect count data from up to 10 door counters/entrances within a 30 metre radius.
The 3G Edition (SNG3G) utilises a cellular 3G connection to communicate through to the IMMOTION™ software. The SNG3G is ideal for situations where there is no Ethernet ports available near the people counting sensors. This device is able to collect count data from up to 10 door counters/entrances within a 30 metre radius. The SNG3G requires a full size 3G SIM (not included) and has been tested with the Telstra 3G Mobile Data SIM - please contact us if you would like us to test with an alternative Australian 3G carrier.
Our IMMOTION™ software allows users to analyse count data by hour, day, week, month, and year in table or graph form. This valuable information reveals peak traffic periods to determine optimal operating hours and staffing requirements, and helps calculate customer/sales conversion ratios.
The IMMOTION™ software/database is optimised to handle multiple locations and/or people counters for easy viewing and overall analysis. The IMMOTION™ software/database is scalable so that additional SNG Hub's and/or door counters can be added at any time.
Wireless people counters include a mounting plate as part of the product design for easy installation on flat surfaces. The following are a list of optional mounting brackets that can be purchased for Wireless People Counters
The versatility of the pivoting door sensor holder makes fitting simple in entrances where the mounting location may not be at right angles. These brackets are also provided in a black finish and supplied as a set of two.
Make Inquiry
Suitable for door/frame mounting. Use when fixing the people counters flush against a wall is not possible. This heavy duty bracket also protects your counters from getting knocked out of alignment. These brackets are supplied as a set of two.
Make Inquiry
The Range Extender increases the Wireless Range between a Wireless People Counter (Network) and the SNG Hub.
With the Wireless People Counter (Network) solution the SNG Hub captures the counting data from one or multiple counters and uploads it to a local or remote server every minute. This requires the SNG Hub to be located anywhere within a range of up to 30 metres (unobstructed) from the Wireless People Counter. Implementing the Range Extender effectively increases the range between the SNG Hub and a single Wireless People Counter by up to a further 30 metre range.
The Range Extender has been designed for ease of installation: when a SNG device is found the LEDs display the signal strength of the detected device. We recommend the Range Extender is installed in a high position to improve the wireless signal via line of sight.
Make Inquiry
Our people counters record the number of people entering and exiting a venue in real time. From this information, we can then calculate and display the total number of people in the venue at any one time. This feature is ideal for venues that are required to monitor capacity numbers in real time to comply with liquor licensing laws, venue capacity limits, etc.
The live count total is displayed on a custom styled web page that is compatible with any web-enabled PC, laptop, tablet or smartphone.
The live count total constantly updates higher or lower depending on the number of people entering or leaving the venue. In addition, a separate 'IN' and 'OUT' count total is collected and can be viewed in an hourly, daily, weekly, monthly and yearly breakdown.
As our people counters only count and do not identify people, the privacy of people passing through our counters is assured.
EvolvePlus provides IMMOTION™ on a hosted turnkey cloud solution, leaving you free to focus on what you do best without the burden of ensuring the IMMOTION™ application is stable, maintained, and secure.
Our cloud solution is run on Amazon's secure and scalable AWS platform based out of Sydney Australia for optimal speed and performance.
Contact for pricing
Brochures - People Counters
Video Demonstration
Contact for pricing
The people count data is simply collected by connecting any USB Stick to the counter via the supplied adapter cable. The read-out from the counter is a complete memory dump. The advanced viewing software ensures that only the newest data is only ever uploaded therefore reducing the pressure to take 'final reads' to gain accurate daily/weekly/monthly/yearly figures. The data can be viewed and analysed in table or graph form.
Our unique USB People Counters are suitable for remote type sites like toilet blocks, outdoor pathways/tracks, car parks, markets and equally suitable for shops, galleries, libraries when wiring/networks are problematic or costly.
A custom designed weatherproof casing is available for purchase with our USB People counters. Molded from the finest commercial grade plastic, the weatherproof and dust-proof case is is designed to withstand the harshest outdoor elements whilst providing superior tamper-proof security to the USB counter sensors. (available in a two piece set).
Make Inquiry
USB people counters include a mounting plate as part of the product design for easy installation on flat surfaces. The following are a list of optional mounting brackets that can be purchased for USB People Counters
The versatility of the pivoting door sensor holder makes fitting simple in entrances where the mounting location may not be at right angles. These brackets are also provided in a black finish and supplied as a set of two.
Make Inquiry
Suitable for door/frame mounting. Use when fixing the people counters flush against a wall is not possible. This heavy duty bracket also protects your counters from getting knocked out of alignment. These brackets are supplied as a set of two.
Make Inquiry
EvolvePlus provides IMMOTION™ on a hosted turnkey cloud solution, leaving you free to focus on what you do best without the burden of ensuring the IMMOTION™ application is stable, maintained, and secure.
Our cloud solution is run on Amazon's secure and scalable AWS platform based out of Sydney Australia for optimal speed and performance.
Contact for pricing
Brochures - People Counters
Video Demonstration
Contact for pricing
The receiver unit of our Display People Counter is equipped with a LCD screen showing the current count. The displayed count can easily be reset back to zero by running a small supplied magnet across the top of the receiver.
The simple end-user installation and maintenance of our systems eliminates technical support costs. Our People Counting Systems are completely wireless and battery powered.
Our LCD Display and Wireless People Counters can be optionally ordered with a robust IP54 rated case.
The IP54 case ensures that the internal electronics are protected from the harsh outdoor elements and provide a high level of protection against water and airborne particles like dust.
The units require no maintenance other than battery changes and for the LCD Display model the 6 digit display is reset with the supplied magnet.
Optional metal brackets are also available for easy installation of the People Counters with the IP54 Outdoor Casing.
Contact for pricing
Display people counters include a mounting plate as part of the product design for easy installation on flat surfaces. The following are a list of optional mounting brackets that can be purchased for Display People Counters
The versatility of the pivoting door sensor holder makes fitting simple in entrances where the mounting location may not be at right angles. These brackets are also provided in a black finish and supplied as a set of two.
Make Inquiry
Suitable for door/frame mounting. Use when fixing the people counters flush against a wall is not possible. This heavy duty bracket also protects your counters from getting knocked out of alignment. These brackets are supplied as a set of two.
Make Inquiry
The Micro LCD Screen Counter is a completely wireless, reliable, and user-friendly People Counting tool. The incredibly small size of the Micro Counter makes it even easier to mount to virtually any wall or door frame. In addition, the infrared beam is transmitted and received from the side allowing the units to be mounted flat against the walls surrounding a doorway.
The transmitter unit transmits an infrared beam to the receiver unit. When someone passes between the 2 units and breaks the infrared beam, the number on the display screen increases by one. The number includes people entering and exiting a space, so the separate in and out counts can be determined by dividing the number by 2. The Counter can be reset back to zero at any time with the use of a special tool we provide. This Counter can be setup in minutes and requires no maintenance at all.
Brochures - People Counters
Video Demonstration
Contact for pricing
The count data is transmitted every minute to our SNG Hub (Ethernet or 3G) unit that can be located anywhere within a 30 metre range (Repeater available to extend the range by another 30 metres). The SNG Hub stores the count data and forwards it as data packets at regular intervals to the 'IMMOTION™' reporting application hosted on-site or in the cloud.
Our 'IMMOTION™' software allows users to analyze the data by hour, day, week, month, and year in table or graph form. This valuable information reveals peak traffic periods to determine optimal operating hours, staffing requirements, calculate customer/sales conversion ratios and analyse production targets.
The 'IMMOTION™' software/database is optimized to handle multiple locations and/or people counters for easy viewing and overall analysis. The 'IMMOTION™' software/database is scalable so that additional SNG Hub's and/or door counters can be added at any time.
The Single Side Laser People Counter consists of a single laser sensor that doesn't require a separate receiver or reflector. It can be configured to count pedestrians or moving objects via a user-defined counting distance of 0.2 to 8 metres. It can count objects in the foreground (e.g. pedestrians on the footpath) whilst ignoring objects in the background (e.g. cars on the road.). Each time a person walks breaks the laser beam, the count increases by one (regardless of direction).
With IP65 rated casing, the Single Side Sensors can be mounted on a building exterior, with connectivity for power and data via a 2 metre cable to the Contact Sensor component located within the building interior.
The supplied Contact Sensor powers the Single Side Laser Sensor via a 2 metre cable, receives the count data from the Single Side Laser Sensor and wirelessly forwards the data to the SNG Hub.
The Contact Sensor can power and connect to two separate Single Side Laser Sensors via separate cables.
The SNG Hub wirelessly communicates with the people counting sensors to receive the latest, up to date, count data from one or more sensors within a 30 metre radius. Once received, the count data is automatically sent at regular intervals to the IMMOTION™ software where the count data can be viewed/exported by hour/day/week/month year totals. Each SNG Hub has the ability to collect the counting data from up to 10 counters.
The SNG Hub is available in two editions:
The Ethernet edition (SNG10E) is designed to connect directly into your local network via an Ethernet cable. The SNG10E is ideal for situations where there are Ethernet ports available within a 30 metre range of the entrance where the doorway sensors are installed. This device is able to collect count data from up to 10 door counters/entrances within a 30 metre radius.
The 3G Edition (SNG3G) utilises a cellular 3G connection to communicate through to the IMMOTION™ software. The SNG3G is ideal for situations where there is no Ethernet ports available near the people counting sensors. This device is able to collect count data from up to 10 door counters/entrances within a 30 metre radius. The SNG3G requires a full size 3G SIM (not included) and has been tested with the Telstra 3G Mobile Data SIM - please contact us if you would like us to test with an alternative Australian 3G carrier.
Our IMMOTION™ software allows users to analyse count data by hour, day, week, month, and year in table or graph form. This valuable information reveals peak traffic periods to determine optimal operating hours, staffing requirements, calculate customer/sales conversion ratios and analyse production targets.
The IMMOTION™ software/database is optimised to handle multiple locations and/or people counters for easy viewing and overall analysis. The IMMOTION™ software/database is scalable so that additional SNG Hub's and/or door counters can be added at any time.
The Range Extender increases the Wireless Range between the Single Side Laser/Contact Sensor and the SNG Hub.
With the Single Side Laser People Counter solution the SNG Hub captures the counting data from one or multiple counters and uploads it to a local or remote server every minute. This requires the SNG Hub to be located anywhere within a range of up to 30 metres (unobstructed) from the Single Side Laser/Contact Sensor. Implementing the Range Extender effectively increases the range between the SNG Hub and a Single Side Laser/Contact Sensor by up to a further 30 metre range.
The Range Extender has been designed for ease of installation: when a SNG Hub is found the LEDs display the signal strength of the detected device. We recommend the Range Extender is installed in a high position to improve the wireless signal via line of sight.
Make Inquiry
EvolvePlus provides IMMOTION™ on a hosted turnkey cloud solution, leaving you free to focus on what you do best without the burden of ensuring the IMMOTION™ application is stable, maintained, and secure.
Our cloud solution is run on Amazon's secure and scalable AWS platform based out of Sydney Australia for optimal speed and performance.
Contact for pricing
Brochures - People Counters
Video Demonstration
Contact for pricing
The units contain imaging optics, sensors, signal processing and interfacing electronics all within a discretely designed moulded housing. High-performance algorithms allow you to count people accurately even in high-volume areas.
The Overhead Thermal People Counters have two count lines allowing separate counting for both "In" and 'Out" directions. The integrated SNG Hub (Ethernet or 3G) provides the wireless capture of the counting data from one or multiple counters and uploads it to a local or remote server every minute.
For wide opening configurations you can implement additional overhead "nodes" to provide a counting coverage over an extended area.
Our unique IMMOTION software allows users to analyse the data by hour, day, week, month, and year in table or graph form. This valuable information reveals peak traffic periods to determine optimal operating hours and staffing requirements, and helps calculate customer/sales conversion ratios.
Our Overhead Thermal Sensor is a ceiling mounted device designed specifically to count multiple people in both directions. It uses a heat-sensitive sensor and a high speed signal processing controller all neatly contained within a moulded plastic housing for easy mounting to the ceiling.
The downward looking configuration allows the thermal sensor to record a count by detecting the heat emitted by people passing underneath within the sensing area. The sensing area of the detector is a square on the floor and the width approximately equal to mounting height (e.g. when mounted at 3.5m a 60˚ unit ‘sees’ a 3.25 x 3.25m square on the floor).
For wide locations, a number of sensors can be joined together to increase the zone span.
The captured people count data is automatically relayed wirelessly from Overhead Thermal Sensor to the Ethernet Network Gateway device (SNG10E) or 3G Gateway device (SNG103G)
This particular model PCM30C1 has a mounting height of 2.2m to 4.8m. (Optional model PCM31C1 with a mounting height of 4.0m to 7.0m is also available)
The SNG Hub wirelessly communicates with the people counting sensors to receive the latest, up to date, count data from one or more entrances within a 30 metre radius. Once received, the count data is automatically sent at regular intervals to the IMMOTION™ software where the count data can be viewed/exported by hour/day/week/month year totals.
The SNG Hub is available in two editions:
The Ethernet edition (SNG10E) is designed to connect directly into your local network via an Ethernet cable. The SNG10E is ideal for situations where there are Ethernet ports available within a 30 metre range of the entrance where the doorway sensors are installed. The SNG Hub is able to collect count data from up to 10 door counters/entrances within a 30 metre radius.
The 3G Edition (SNG3G) utilises a cellular 3G connection to communicate through to the IMMOTION™ software. The SNG3G is ideal for situations where there is no Ethernet ports available near the people counting sensors. This device is able to collect count data from up to 10 door counters/entrances within a 30 metre radius. The SNG3G requires a full size 3G SIM (not included) and has been tested with the Telstra 3G Mobile Data SIM - please contact us if you would like us to test with an alternative Australian 3G carrier.
Our IMMOTION™ software allows users to analyse count data by hour, day, week, month, and year in table or graph form. This valuable information reveals peak traffic periods to determine optimal operating hours and staffing requirements, and helps calculate customer/sales conversion ratios.
The IMMOTION™ software/database is optimised to handle multiple locations and/or people counters for easy viewing and overall analysis. The IMMOTION™ software/database is scalable so that additional SNG Hub's and/or door counters can be added at any time.
The Range Extender increases the Wireless Range between a Wireless People Counter (Network) and the SNG Hub.
With the Wireless People Counter (Network) solution the SNG Hub captures the counting data from one or multiple counters and uploads it to a local or remote server every minute. This requires the SNG Hub to be located anywhere within a range of up to 30 metres (unobstructed) from the Wireless People Counter. Implementing the Range Extender effectively increases the range between the SNG Hub and a single Wireless People Counter by up to a further 30 metre range.
The Range Extender has been designed for ease of installation: when a SNG Hub is found the LEDs display the signal strength of the detected device. We recommend the Range Extender is installed in a high position to improve the wireless signal via line of sight.
Make Inquiry
Our people counters record the number of people entering and exiting a venue in real time. From this information, we can then calculate and display the total number of people in the venue at any one time. This feature is ideal for venues that are required to monitor capacity numbers in real time to comply with liquor licensing laws, venue capacity limits, etc.
The live count total is displayed on a custom styled web page that is compatible with any web-enabled PC, laptop, tablet or smartphone.
The live count total constantly updates higher or lower depending on the number of people entering or leaving the venue. In addition, a separate 'IN' and 'OUT' count total is collected and can be viewed in an hourly, daily, weekly, monthly and yearly breakdown.
As our people counters only count and do not identify people, the privacy of people passing through our counters is assured.
EvolvePlus provides IMMOTION™ on a hosted turnkey cloud solution, leaving you free to focus on what you do best without the burden of ensuring the IMMOTION™ application is stable, maintained, and secure.
Our cloud solution is run on Amazon's secure and scalable AWS platform based out of Sydney Australia for optimal speed and performance.
Contact for pricing
Brochures - People Counters
Video Demonstration
Contact for pricing
Our wireless people counters record the number of people entering and exiting a venue and automatically send the data every minute to the IMMOTION Cloud. We also offer Instant People Counters that relay data in real time without any lag to ensure you’re getting accurate to-the-second patron numbers.
From this information, the People Inside Web App calculates and displays the total number of people in the venue at any one time, and supports single and multiple entrance/exit points.
The live count total is displayed on a responsive designed web page compatible with TV screens, desktops, tablets and smartphones. The live count total constantly updates higher or lower depending on the number of people entering or leaving the venue.
As our people counters only count and do not identify people, the privacy of people passing through our counters is assured.
The wireless counters consist of 2 doorway sensors (transmitter and receiver) that generate an infrared beam across an entrance up to 8 metres wide. Each time a person walks through the entrance and breaks the infrared beam, the count increases by one. The wireless counters are bi-directional and will count both 'In' and 'Out' directions and provide totals for each direction.
The doorway sensors come with mounting plates that allow them to be fixed to a flat surface, using either screws or double sided mounting tape. The counters use standard AA batteries that will last up to 2 years with standard usage. Additional brackets can be purchased for more complex mounting configurations.
Our Overhead Thermal People Counters fit discreetly into the ceiling facing downwards and count the people that pass underneath using thermal technology. The sensors are designed to detect the heat emitted by people passing underneath it as infrared radiation.
The units contain imaging optics, sensors, signal processing and interfacing electronics all within a discretely designed moulded housing. High-performance algorithms allow you to count people accurately even in high-volume areas. You can also network multiple sensors, dividing up areas however you choose to evaluate their use in whatever level of detail you need. For wide opening configurations you can implement additional overhead "nodes" to provide a counting coverage over an extended area.
The SNG Hub wirelessly communicates with the people counting sensors to receive the latest, up to date, count data from one or more entrances within a 30 metre radius. Once received, the count data is automatically sent at regular intervals to the IMMOTION™ software where the count data can be viewed/exported by hour/day/week/month year totals.
The SNG Hub is available in two editions:
The Ethernet edition (SNG10E) is designed to connect directly into your local network via an Ethernet cable. The SNG10E is ideal for situations where there are Ethernet ports available within a 30 metre range of the entrance where the doorway sensors are installed. This device is able to collect count data from up to 10 door counters/entrances within a 30 metre radius.
The 3G Edition (SNG3G) utilises a cellular 3G connection to communicate through to the IMMOTION™ software. The SNG3G is ideal for situations where there is no Ethernet ports available near the people counting sensors. This device is able to collect count data from up to 10 door counters/entrances within a 30 metre radius. The SNG3G requires a full size 3G SIM (not included) and has been tested with the Telstra 3G Mobile Data SIM - please contact us if you would like us to test with an alternative Australian 3G carrier.
Our IMMOTION™ software allows users to analyse count data by hour, day, week, month, and year in table or graph form. This valuable information reveals peak traffic periods to determine optimal operating hours and staffing requirements, and helps calculate customer/sales conversion ratios.
The IMMOTION™ software/database is optimised to handle multiple locations and/or people counters for easy viewing and overall analysis. The IMMOTION™ software/database is scalable so that additional SNG Hub's and/or door counters can be added at any time.
The People Inside web app calculates and displays the total occupancy of people in a venue at any one time. The live occupancy number is displayed on a responsive designed web page compatible with TV screens, desktops, tablets and smartphones.
The Range Extender increases the Wireless Range between a Wireless People Counter and the SNG Hub.
With the Wireless People Counter solution the SNG Hub captures the counting data from one or multiple counters and uploads it to a local or remote server every minute. This requires the SNG Hub to be located anywhere within a range of up to 30 metres (unobstructed) from the Wireless People Counter. Implementing the Range Extender effectively increases the range between the SNG Hub device and a single Wireless People Counter by up to a further 30 metre range.
The Range Extender has been designed for ease of installation: when a SNG Hub is found the LEDs display the signal strength of the detected device. We recommend the Range Extender is installed in a high position to improve the wireless signal via line of sight.
Make Inquiry
Smiley Feedback Counter
Contact for pricing
The size and weight of our battery powered Smiley Survey Counters allows for installation almost anywhere. Our counters are designed and built in Europe for the highest quality whilst remaining one of the most cost-effective counters on the market.
The Smiley Feedback Counters are available with choice of 5 separate smiley buttons, with the ability to program button press delay to minimise repetitive button presses. The feedback counter is battery powered for both portability and easy installation, and available with an optional metal brackets for mounting on a stand or wall. It can also be integrated with our Wireless People Counter solution for additional data validation & analysis.
The Smiley Feedback Counter can be integrated with our modular EvolvePlus People Counter solution so that footfall traffic statistics and customer satisfaction feedback are available from a centralised Web Dashboard.
There are three main components within the solution:
1. Smiley Feedback Counters
The Smiley Feedback Counters are battery powered for easy installation and are available with choice of smiley button and single colour button models.
2. SNG Hub
The SNG Hub connects wirelessly to the counters to receive the latest, up to date, count data from one or more entrances/areas and is available in either Ethernet or 3G/4G models. Once received, the count data is automatically sent at regular intervals to the IMMOTION software.
3. IMMOTION Software
The IMMOTION software allows organisations to analyse button presses by the hours of the day in both table and pie chart format. The IMMOTION software is available in both On-Premise and Cloud editions.
The smiley feedback counter is a battery powered wireless device which allows for easy installation into almost any location. The smiley feedback counter has 5 configurable buttons which when pressed will communicate instantly to the SNG (the "Base Station") which then sends the feedback to the IMMOTION software for reporting and analysis. Button presses are sent out with a time stamp generated by an internal clock.
The smiley feedback counter comes with 2x 3.6v AA lithium batteries that will last up to 1 year with standard use.
The SNG Hub wirelessly communicates with the smiley feedback counter to receive instant information on which buttons have been pressed. Once received, the data is automatically sent at regular intervals to the IMMOTION™ software where the count data can be viewed for reporting.
The SNG Hub is available in two editions:
The Ethernet edition (SNG10E) is designed to connect directly into your local network via an Ethernet cable. The SNG10E is ideal for situations where there are Ethernet ports available within a 30 metre range of where the smiley feedback counters are installed. This device is able to collect count data from up to 10 feedback counters within a 30 metre radius.
The 3G Edition (SNG3G) utilises a cellular 3G connection to communicate through to the IMMOTION™ software. The SNG3G is ideal for situations where there is no Ethernet ports available near the smiley feedback counters. This device is able to collect count data from up to 10 feedback counters within a 30 metre radius. The SNG3G requires a full size 3G SIM (not included) and has been tested with the Telstra 3G Mobile Data SIM - please contact us if you would like us to test with an alternative Australian 3G carrier.
Our IMMOTION™ software allows organisations to analyse button presses by the hours of the day in both table and pie chart format. This information provides valuable feedback that allows you to make data driven decisions on the survey feedback from your customers.
The IMMOTION™ software/database is optimised to handle multiple feedback counters for easy viewing and overall analysis. The IMMOTION™ software/database is scalable so that additional SNG Hub's and/or smiley feedback counters can be added at any time.
The Range Extender increases the Wireless Range between a Wireless People Counter (Network) and the SNG Hub.
With the Wireless People Counter (Network) solution the SNG Hub captures the counting data from one or multiple counters and uploads it to a local or remote server every minute. This requires the SNG Hub to be located anywhere within a range of up to 30 metres (unobstructed) from the Wireless People Counter. Implementing the Range Extender effectively increases the range between the SNG Hub and a single Wireless People Counter by up to a further 30 metre range.
The Range Extender has been designed for ease of installation: when a SNG device is found the LEDs display the signal strength of the detected device. We recommend the Range Extender is installed in a high position to improve the wireless signal via line of sight.
Make Inquiry
EvolvePlus provides IMMOTION™ on a hosted turnkey cloud solution, leaving you free to focus on what you do best without the burden of ensuring the IMMOTION™ application is stable, maintained, and secure.
Our cloud solution is run on Amazon's secure and scalable AWS platform based out of Sydney Australia for optimal speed and performance.
Contact for pricing
Forget the headache of messy cables and wires with our plug and play platform that allows you to be up and running before you know it.
Our IMMOTION software allows you to easily view critical counting information broken into day/week/month/year totals.
Our people counters are designed and built in Europe and built with extreme quality and care to the finest detail.
There are absolutely no ongoing or hidden costs with our solutions. The software is provided free of charge with any of our people counting solutions.
Copyright © EvolvePlus NZ